Exterior Colour:
Gray tinted carbon; with white and red accents
x
Interior Colour:
Black and clear coated carbon
X
History:
Delivered to South California, U.S.A.
X
Exterior Look:
007137-Agera-RS Draken’s car body is completely finished a high gloss coat of varnish in gray tinted carbon fiber/Kevlar® with mainly white and very few red accents. The Koenigsegg Twin Deck Formular 1 Spoiler® with vertical center strake and Koenigsegg Dynamically Active Rear Wing®, both finished in clear coated carbon fiber/Kevlar® add presumably circa 100 kg downforce, adding up to about 450 kg downforce at 250 km/h. In connection with the ventilation intakes and outtakes the outstanding downforce ensures the high-speed performance and stabilizes 007137-Agera-RS Draken during all driving manoeuvres. Next to these technical details to differentiate 007137-Agera-RS Draken from others, are other distinctions which are depending on special requirements and ideas of the customer and owner as well as a their individual specification. 007137-Agera-RS Draken’s Koenigsegg F1 Spoiler® is finished in gray tinted Kevlar® with white accents on the spoiler‘s edges and at the sides on the lowest winglet are white painted fins. The center strake does not have a white accent on the edge but the inside of its annular air passage is finished with one of the few red accents. Between the Koenigsegg F1 Spoiler® and headlights, the large air-intakes received a white stripe, starting broader at the center and becoming finer at the sides, complementing the accents on the spoiler‘s winglets and the white coloured fins as well as on the front hood. The Koenigsegg crest emplem on the front hood is finished in grayish-silver. The trapezoidal shaped area in the center of the front hood is visualized by white lines starting thinner from the closure of the front hood and becoming broader towards the windshield. An air-intake and on which Koenigsegg in white letters is placed, is centered on this area. Two additional air-intakes on the front hood, but outside of the trapezoidal area, are done in gray tinted Kevlar® at the air-intakes’ sides and at the areas that lead aerodynamic-supporting tunnels. The new engineered and designed air-intakes on the front fenders, also finished in gray tinted Kevlar® are supporting also the aerodynamics. In continuation from the white lines visualizing the trapezoidal shaped area on the front hood, these white lines continue on the gray tinted double hum roof and lead all the way down the rear bonnet and onto the edges of the rear wing‘s fixings. Gray tinted Kevlar® is used for the newly engineered and designed ventilation outtakes on the rear fenders. The window on the rear bonnet is offering a view into the motor compartment, ending in a concave shape which is not attached to the car body, but leaving a space which is actually an air-outtake. The third shock absorber of the Koenigsegg Triplex Rear Suspension® is visible from the outside, especially due to the red coloured writing on top of it. The Koenigsegg Rear Wing® has fine, white lines on the edges and are framing the complete Koenigsegg Rear Wing®. Also with framed with white lines are the rear wing’s fins which have the model addendum RS in curvaceous, red accent-letters. Rearview mirror covers and the curvaceous mirror arms are done in gray tinted Kevlar® without further white or red accents. Large air-intakes of each car side of 007137-Agera-RS Draken are done in gray tinted Kevlar® with broad, white stripes on the lower part, continuing onto the side rails into the passenger compartment and are visible when the Koenigsegg-Helix-doors® are open. White stripes are concurrently continuing parallel to the side sills and at the ending, bending upwards towards the model call out batches, which state usually the model name. However, not for 007137-Agera-RS. Draken in red and straight writing is stated and the batches are becoming Draken-batches. Furthermore, at the ending of the „n“ of Draken, a red arrow is attached, showing upwards. On each car side, white stripes continue from the front wheel arches, rising slightly and ending almost above the Draken-batches on the salient, leading side edges. Side sills are done completely in gray tinted Kevlar® starting at the front wheel arches and ending before the rear wheel arches with gray tinted Kevlar® fins. 007137-Agera-RS Draken’s wheels are black, five-spoke hollow Aircore® carbon fiber wheels which are fixed with an out of the ordinary silver coloured center locking system. The brake calipers shine through the spokes in red colour with Koenigsegg in black letters on them. A centered white coloured Koenigsegg is centered between the Koenigsegg Rear Wing® and the rear air-outlet. The large sized rear air-outlet is framed by a white stripe and is integrated between the Koenigsegg Rear Wing® and the gray tinted Kevlar® rear bumper, which clarifies the need of substancial cooling for the powerful V8 engine. Centered integrated into the rear bumper is the trapezoidas and black coloured exhaust tailpipe. White lines are painted on the edges of the diffusor’s slats at the sides of the exhaust. Gray tinted Kevlar® and quite contrasting white accents with few red „marks“ combine the mystic and „gleaming“ look of 007137-Agera-RS Draken.
X
Interior Fittings:
Black leather with red stitching, red seams and clear coated carbon
X
